+--------------------------------------------------------------------+
| |
| BAYES EXAMPLE 6SB |
| |
+--------------------------------------------------------------------+
This is example6sb.ctl from the NONMEM 7 distribution medium. It,
along with the data file, can be found in the examples directory.
Note the old style syntax for priors.
;Model Desc: Receptor Mediated Clearance model with Dynamic Change
; in Receptors
;Project Name: nm7examples
;Project ID: NO PROJECT DESCRIPTION
$PROB RUN# example6sb (from r2compl)
$INPUT C SET ID JID TIME DV=CONC DOSE=AMT RATE EVID MDV CMT
$DATA example6.csv IGNORE=C
; The new numerical integration solver is used, although ADVAN=9
; is also efficient for this problem.
$SUBROUTINES ADVAN13 TRANS1 TOL=4
$MODEL NCOMPARTMENTS=3
$PRIOR NWPRI NTHETA=8, NETA=8, NTHP=0, NETP=8, NPEXP=1
$PK
MU_1=THETA(1)
MU_2=THETA(2)
MU_3=THETA(3)
MU_4=THETA(4)
MU_5=THETA(5)
MU_6=THETA(6)
MU_7=THETA(7)
MU_8=THETA(8)
VC=EXP(MU_1+ETA(1))
K10=EXP(MU_2+ETA(2))
K12=EXP(MU_3+ETA(3))
K21=EXP(MU_4+ETA(4))
VM=EXP(MU_5+ETA(5))
KMC=EXP(MU_6+ETA(6))
K03=EXP(MU_7+ETA(7))
K30=EXP(MU_8+ETA(8))
S3=VC
S1=VC
KM=KMC*S1
F3=K03/K30
$DES
DADT(1) = -(K10+K12)*A(1) + K21*A(2) - VM*A(1)*A(3)/(A(1)+KM)
DADT(2) = K12*A(1) - K21*A(2)
DADT(3) = -VM*A(1)*A(3)/(A(1)+KM) - K30*A(3) + K03
$ERROR
CALLFL=0
ETYPE=1
IF(CMT.NE.1) ETYPE=0
IPRED=F
Y = F + F*ETYPE*EPS(1) + F*(1.0-ETYPE)*EPS(1)
$THETA
;Initial Thetas
( 4.0 ) ;[MU_1]
( -2.1 ) ;[MU_2]
( 0.7 ) ;[MU_3]
( -0.17 );[MU_4]
( 2.2 ) ;[MU_5]
( 0.14 ) ;[MU_6]
( 3.7 ) ;[MU_7]
( -0.7) ;[MU_8]
; degrees of freedom for OMEGA prior
(8 FIXED) ;[dfo]
;Initial Omegas
$OMEGA BLOCK(8)
0.2 ;[p]
-0.0043 ;[f]
0.2 ;[p]
0.0048 ;[f]
-0.0023 ;[f]
0.2 ;[p]
0.0032 ;[f]
0.0059 ;[f]
-0.0014 ;[f]
0.2 ;[p]
0.0029 ;[f]
0.0027 ;[f]
-0.00026 ;[f]
-0.0032 ;[f]
0.2 ;[p]
-0.0025 ;[f]
0.00097 ;[f]
0.0024 ;[f]
0.00197 ;[f]
-0.0080 ;[f]
0.2 ;[p]
0.0031 ;[f]
-0.00571 ;[f]
0.0030 ;[f]
-0.0074 ;[f]
0.0025 ;[f]
0.0034 ;[f]
0.2 ;[p]
0.00973 ;[f]
0.00862 ;[f]
0.0041 ;[f]
0.0046 ;[f]
0.00061 ;[f]
-0.0056 ;[f]
0.0056 ;[f]
0.2 ;[p]
; Omega prior
$OMEGA BLOCK(8)
0.2 FIX
0.0 0.2
0.0 0.0 0.2
0.0 0.0 0.0 0.2
0.0 0.0 0.0 0.0 0.2
0.0 0.0 0.0 0.0 0.0 0.2
0.0 0.0 0.0 0.0 0.0 0.0 0.2
0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.2
$SIGMA BLOCK(1) 0.1 ;[p]
; Starting with a short iterative two stage analysis brings the
; results closer so less time needs to be spent during the burn-in
; of the BAYES analysis
$EST METHOD=ITS INTERACTION SIGL=4 NITER=30 PRINT=1
FILE=example6sb.ext NOABORT NOPRIOR=1 CTYPE=3
$EST METHOD=IMP INTERACTION SIGL=4 NITER=30 PRINT=1
FILE=example6sb.ext NOABORT NOPRIOR=1 ISAMPLE=100
$EST METHOD=BAYES INTERACTION NBURN=4000 SIGL=4 NITER=1000 PRINT=10
CTYPE=3 FILE=example6sb.txt NOABORT NOPRIOR=0
; By default, ISAMPLE_M* are 2. Since there are many data points
; per subject, setting these to 1 is enough, and it reduces the
; time of the analysis
ISAMPLE_M1=1 ISAMPLE_M2=1 ISAMPLE_M3=1 IACCEPT=0.4
$COV MATRIX=R UNCONDITIONAL
REFERENCES: Guide Introduction_7
Go to main index.
Created by nmhelp2html v. 1.0 written by Niclas Jonsson (Modified by AJB 5/2006,11/2007,10/2012)